TM 5-3805-261-20
BLADE MAINTENANCE.
17-5.
Centershift Lock Control Valve Assembly. (Sheet 2 of 3)
REMOVAL
1.
Cut and remove strap (1, Figure 17-10).
Discard strap (1).
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends and plug all open hydraulic
ports to prevent contamination.
2.
Disconnect hose assembly (2).
3.
Disconnect hose assemblies (3, 4 and 5,
Figure 17-11).
4.
Remove items 6 thru 13 as an assembly.
5.
Remove unions (6, 7 and 8), elbows (9, 10
and 11) and plug (12) from valve (13,
Figure 17-12).
CLEANING
Clean all parts. Refer to Chapter 2.
INSPECTION
Inspect all parts. Refer to Chapter 2.
Figure 17-12.
Go to Sheet 3
Figure 17-10.
Figure 17-11.
17-11
