TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-27.
Circle Drive Motor Hoses and Fittings. (Sheet 2 of 6)
REMOVAL
NOTE
All hose and tube assemblies must
be tagged before disconnecting to
aid in installation. Cap all hose and
tube ends to prevent contamination.
1.
Disconnect hose assemblies (12 and 13,
Figure 15-112).
2.
Remove connector (1), preformed packing
(2), connector (3) and preformed packing
(4). Discard preformed packings (2 and 4).
3.
Remove bolt (5), washer (6) and clamp (7,
Figure 15-113).
4.
Remove two bolts (8), washers (9), plates
(10) and clamps (11, Figure 15-114). TM 5-
3805-261-20
Figure 15-113.
Figure 15-112.
Figure 15-114.
Go to Sheet 3
15-144
