TM 5-3805-261-20
HYDRAULIC SYSTEM MAINTENANCE. (cont)
15-19. Hydraulic Control Levers. (Sheet 2 of 11)
REMOVAL
1.
Remove bolt (1), washer (2), retainer (3),
shim (4) and bearing (5, Figure 15-37) on
left side of steering console.
NOTE
Control
levers
must
be
out
of
alignment
to
provide
adequate
clearance for removal of bolts.
2.
Remove bolt (6) and lockwasher (7).
3.
Disconnect linkage (8).
4.
Loosen nut (10).
5.
Remove blade lift knob (9) and nut (10).
Figure 15-37.
Go to Sheet 3
15-74
