TM 5-3805-261-10
SECTIONALIZATION FOR AIR TRANSPORT - CONTINUED
0019 00
DISASSEMBLY - CONTINUED
30.
Pull all hoses, cables, and wiring harness through platform supports on both sides of machine.
WARNING
Wear eye protection when disconnecting hydraulic hoses. Failure to follow this warning may cause injury to
personnel.
31.
Slightly loosen two hose fittings (49) at check valve (50) to relieve pressure.
32.
Tighten two hose fittings (49) at check valve (50).
49
50
397-1076
NOTE
The following step is for the left side. Repeat step for the right side of machine.
33.
Disconnect two hoses (51) from left articulation cylinder (52) and install dust covers on connectors.
52
51
397-1077
0019 00-10
