TM 5-3805-261-10
ADVANCED OPERATION AND OPERATOR TIPS - CONTINUED
0006 00
TRAVELING AND EARTH MOVING OPERATIONS - CONTINUED
High Bank Cuts - Right Side - Continued
9.
Lower the right lift cylinder to set the desired degree
of bank slope.
10.
Move into the cut gradually.
397-1031
NOTE
The wheels normally should be near the vertical position.
11.
Lean the wheels toward the slope for a heavier cut.
397-1032
NOTE
The procedure shown is for the right side.
Position the blade opposite to that shown
for the left side. Keep the material from
the slope moved to the outside of the rear
wheels.
12.
Lean the wheels away from the slope for a lighter cut.
397-1033
0006 00-32
