TM 5-3805-261-10
ADVANCED OPERATION AND OPERATOR TIPS - CONTINUED
0006 00
TRAVELING AND EARTH MOVING OPERATIONS - CONTINUED
High Bank Cuts - Right Side - Continued
4.
Move the centershift lock pin to the far left position.
Move the centershift lock pin lever to the INDEX and
RUN position.
5.
Sideshift the blade to the right.
6.
Rotate the circle counterclockwise. Lower the left lift
cylinder while the circle is turning.
397-1028
7.
Lower the left lift cylinder to set heel of the blade at
the bottom of the slope and in line with the outer edge
of the rear tire.
397-1029
8.
The right rear tires should be in the "V" at the base of
the slope.
397-1030
0006 00-31
