TM 5-3805-293-23-5
0338
REMOVAL
000338
N OT E
Tag and mark wires to aid in installation.
1. Position terminal covers (Figure 1, Item 4) aside.
2. Remove bolt (Figure 1, Item 1), washer (Figure 1, Item 2), and negative battery cable (Figure 1, Item 5), from
bulkhead connector (Figure 1, Item 3).
3. Remove bolt (Figure 1, Item 10), washer (Figure 1, Item 11), and positive battery cable (Figure 1, Item 7) from
bulkhead connector (Figure 1, Item 12).
4. Remove two bolts (Figure 1, Item 8), washers (Figure 1, Item 9), and four clamps (Figure 1, Item 6).
Figure 1. Lower Cable Ends.
0338