TM 5-3805-293-23-5
0332
REMOVAL CONTINUED
8. Remove eight screws (Figure 5, Item 3), washers (Figure 5, Item 4) and two junction blocks (Figure 5, Item 2)
from engine enclosure panel (Figure 5, Item 1).
Figure 5. Junction Block.
0332
END OF TASK
CLEANING AND INSPECTION
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
1. Install two junction blocks (Figure 5, Item 2), eight washers (Figure 5, Item 4) and screws (Figure 5, Item 3) on
engine enclosure panel (Figure 5, Item 1).