TM 5-3805-293-23-5
0319
REMOVAL
000319
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury to personnel.
N OT E
Tag and mark hoses to aid in installation.
1. Disconnect hydraulic hose (Figure 1, Item 2) and remove O-ring (Figure 1, Item 2) from fitting (Figure 1,
Item 8). Discard O-ring.
2. Remove fitting (Figure 1, Item 2) and O-ring (Figure 1, Item 2) from circle drive hydraulic motor (Figure 1,
Item 4). Discard O-ring.
3. Disconnect hydraulic hose (Figure 1, Item 10) and remove O-ring (Figure 1, Item 9) from fitting (Figure 1,
Item 2). Discard O-ring.
4. Remove fitting (Figure 1, Item 2) and O-ring (Figure 1, Item 2) from circle drive hydraulic motor (Figure 1,
Item 4). Discard O-ring.
Figure 1. Circle Drive Hydraulic Motor Hoses.
0319