TM 5-3805-293-23-5
0319
INSTALLATION CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury to personnel.
3. Install new O-ring (Figure 4, Item 9) and fitting (Figure 4, Item 6) on circle drive hydraulic motor (Figure 4,
Item 4)
4. Install new O-ring (Figure 4, Item 7) and connect hydraulic hose (Figure 4, Item 8) to fitting (Figure 1, Item 6).
5. Install new O-ring (Figure 4, Item 3) and fitting (Figure 4, Item 5) on circle drive hydraulic motor (Figure 4,
Item 4).
6. Install new O-ring (Figure 4, Item 1) and connect hydraulic hose (Figure 4, Item 2) to fitting (Figure 4, Item 5).
Figure 4. Circle Drive Hydraulic Motor Hoses.
0319
END OF TASK
FOLLOW-ON TASKS
000319
1. Remove hydraulic system vacuum cap (WP 0221).
2. Check hydraulic system oil level (WP 0217).
END OF TASK
END OF WORK PACKAGE