TM 5-3805-293-23-4
0268
REMOVAL CONTINUED
4. Loosen two bolts (Figure 3, Item 4) and disconnect two connectors (Figure 3, Item 5) from ECM (Figure 3,
Item 1).
5. Remove bolt (Figure 3, Item 7), washer (Figure 3, Item 6), and ground strap (Figure 3, Item 8) from ECM
(Figure 3, Item 1).
6. Remove three bolts (Figure 3, Item 3), washers (Figure 3, Item 2), and bracket (Figure 3, Item 9) from ECM
(Figure 3, Item 1).
7. Remove ECM (Figure 3, Item 1) from machine.
Figure 3. ECM Connectors and Mounting Hardware.
0268
END OF TASK