TM 5-3805-293-23-4
0267
CLEANING AND INSPECTION
000267
1. Clean and inspect all mechanical parts IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical parts IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK
INSTALLATION
000267
1. Install 24 volt flasher module (Figure 3, Item 3), two washers (Figure 3, Item 2) and bolts (Figure 3, Item 1) on
cab.
2. Connect lower cab harness connector (Figure 3, Item 4) to 24 volt flasher module (Figure 3, Item 3).
3. Install cab air filter duct (Figure 2, Item 1), two bolts (Figure 2, Item 2), and screw (Figure 2, Item 3) on cab.
4. Install cab air filter on cab air filter duct (Figure 2, Item 1).
5. Install left trim carpet (Figure 4, Item 6) and right trim carpet (Figure 4, Item 3) in cab.
6. Install trim cover (Figure 4, Item 5) and two screws (Figure 4, Item 4) on cab.
7. Install cab air filter cover (Figure 4, Item 2) and tighten two thumbscrews (Figure 4, Item 1).
Figure 4. Trim Cover.
0267
END OF TASK
FOLLOW-ON TASKS
000267
Install seat (WP 0284).
END OF TASK
END OF WORK PACKAGE