TM 5-3805-293-23-4
0266
DISASSEMBLY
000266
1. Remove two screws (Figure 12, Item 5), lockwashers (Figure 12, Item 4), and circuit breaker (Figure 12,
Item 6) from faceplate (Figure 12, Item 2). Discard lockwashers.
2. Remove four screws (Figure 12, Item 8), washers (Figure 12, Item 9), cap and tether (Figure 12, Item 7), and
diagnostic connector (Figure 12, Item 10) from faceplate (Figure 12, Item 2).
3. Remove four screws (Figure 12, Item 1) and faceplate (Figure 12, Item 2) from fuse panel (Figure 12, Item 3).
Figure 12. Fuse Panel Faceplate.
0266
END OF TASK
CLEANING AND INSPECTION
000266
Clean and inspect all electrical components IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK
ASSEMBLY
000266
1. Install faceplate (Figure 12, Item 2) and four screws (Figure 12, Item 1) on fuse panel (Figure 12, Item 3).
2. Install diagnostic connector (Figure 12, Item 10), cap and tether (Figure 12, Item 7), four washers (Figure 12,
Item 9), and screws (Figure 12, Item 8) on faceplate (Figure 12, Item 2).
3. Install circuit breaker (Figure 12, Item 6), two new lockwashers (Figure 12, Item 4), and screws (Figure 12,
Item 5) on faceplate (Figure 12, Item 2).
END OF TASK