TM 5-3805-293-23-4
0265
REMOVAL CONTINUED
7. Disconnect two cab upper wiring harness terminals (Figure 3, Item 6) from resistor (Figure 3, Item 4).
8. Remove two screws (Figure 3, Item 5) and resistor (Figure 3, Item 4) from cab.
9. Disconnect cab upper wiring harness connector (Figure 3, Item 1) from 12 volt power inverter (Figure 3,
Item 7).
10. Remove four screws (Figure 3, Item 2), washers (Figure 3, Item 3), and 12 volt power inverter (Figure 3,
Item 7) from cab.
Figure 3. Resistor and 12 Volt Power Inverter Connections.
0265