TM 5-3805-293-23-4
0257
REMOVAL CONTINUED
000257
4. Remove link assembly (Figure 2, Item 8) from lever (Figure 2, Item 7).
5. Remove cotter pin (Figure 2, Item 1) and lever (Figure 2, Item 7) from mounting block assembly (Figure 2,
Item 2). Discard cotter pin.
N OT E
Note the position of machine articulation angle sensor to aid in installation.
O-ring may not be installed on new machine articulation angle sensor.
6. Remove two screws (Figure 2, Item 4), washers (Figure 2, Item 5), machine articulation angle sensor
(Figure 2, Item 3) and O-ring (Figure 2, Item 6) from mounting block assembly (Figure 2, Item 2). Discard
O-ring.
Figure 2. Machine Articulation Angle Sensor.
0257
END OF TASK
CLEANING
000257
Clean all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK