TM 5-3805-293-23-4
0256
REMOVAL CONTINUED
000256
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag hoses to aid in installation.
15. Disconnect hose (Figure 6, Item 8) from tube (Figure 6, Item 1) and remove O-ring (Figure 6, Item 7). Remove
hose from machine. Discard O-ring.
16. Remove nut (Figure 6, Item 4), washer (Figure 6, Item 10), and clamp (Figure 6, Item 9), spacer (Figure 6,
Item 5) and two clamps (Figure 6, Item 6) from tube (Figure 6, Item 1) and stud (Figure 6, Item 11).
17. Disconnect tube (Figure 6, Item 1) from rear valve (Figure 6, Item 3) and remove O-ring (Figure 6, Item 2).
Remove tube from machine. Discard O-ring.
Figure 6. Left-Side Rear Valve.
0256
END OF TASK
CLEANING AND INSPECTION
000256
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK