TM 5-3805-293-23-4
0243
REMOVAL
000243
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Tag and mark lines to aid in installation.
1. Disconnect tube (Figure 1, Item 3) and remove O-ring (Figure 1, Item 2) from manifold block (Figure 1, Item 1).
Discard O-ring.
2. Disconnect tube (Figure 1, Item 4) and remove O-ring (Figure 1, Item 10) and tube (Figure 1, Item 4) from
steering control valve (Figure 1, Item 11). Discard O-ring.
3. Remove four bolts (Figure 1, Item 5), washers (Figure 1, Item 6), and two clamps (Figure 1, Item 9) from hose
(Figure 1, Item 7).
4. Disconnect hose (Figure 1, Item 7) and remove O-ring (Figure 1, Item 8) from steering control valve (Figure 1,
Item 11). Discard O-ring.
Figure 1. Right-Side Steering Control Valve.
0243