TM 5-3805-293-23-4
0238
REMOVAL CONTINUED
N OT E
Tag wires and cables to aid in installation.
2. Remove tiedown strap (Figure 2, Item 3) from wiring harness (Figure 2, Item 2). Discard tiedown strap.
3. Disconnect connector (Figure 2, Item 1) from wiring harness (Figure 2, Item 2).
4. Remove two nuts (Figure 2, Item 9) and cables (Figure 2, Item 4) from main power relay magnetic switch
(Figure 2, Item 5).
5. Remove two nuts (Figure 2, Item 6), washers (Figure 2, Item 7), and main power relay magnetic switch
(Figure 2, Item 5) from circuit breaker box (Figure 2, Item 8).
Figure 2. Relay Cables.
0238
END OF TASK
CLEANING AND INSPECTION
000238
1. Clean and inspect all mechanical parts IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical parts IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK