TM 5-3805-293-23-4
0220
REMOVAL CONTINUED
000220
14. Remove three bolts (Figure 6, Item 23), washers (Figure 6, Item 22), clamps (Figure 6, Item 21), hydraulic tank
breather (Figure 6, Item 17) and grommet (Figure 6, Item 2) from platform (Figure 6, Item 1).
15. Remove two bolts (Figure 6, Item 15), washers (Figure 6, Item 16) and ether bottle clamp (Figure 6, Item 14)
from platform (Figure 6, Item 1).
16. Position boot (Figure 6, Item 9) aside.
17. If arctic heater is installed, remove nut (Figure 6, Item 7), washer (Figure 6, Item 8) and battery cable (Figure 6,
Item 13) from junction block (Figure 6, Item 6).
18. If arctic heater is installed, remove bolt (Figure 6, Item 11), washer (Figure 6, Item 10), clamp (Figure 6,
Item 12) and battery cable (Figure 6, Item 13) from platform (Figure 6, Item 1).
19. Remove eight screws (Figure 6, Item 18), washers (Figure 6, Item 19), two junction blocks (Figure 6, Item 6)
and gaskets (Figure 6, Item 20) from platform (Figure 6, Item 1). Discard gaskets if damaged.
20. Remove three bolts (Figure 6, Item 4), washers (Figure 6, Item 3) and bracket (Figure 6, Item 5) from platform
(Figure 6, Item 1).
Figure 6. Breather and Junction Blocks.
0220
END OF TASK