TM 5-3805-293-23-4
0218
FRONT VALVE BANK CONTINUED
5. Remove four locknuts (Figure 12, Item 4) and washers (Figure 12, Item 3) from line support brackets (Figure
12, Item 5). Discard locknuts.
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
C AU T I O N
Cap all open lines and fittings to prevent dirt from entering system and to prevent leakage.
Keep all parts clean from contaminants. Contaminants may cause rapid wear and
shortened component life.
6. Disconnect AWD line (Figure 12, Item 2) from AWD tube (Figure 12, Item 1).
Figure 12. AWD Line and Line Brackets (Serial Number Prefix RMY).
0218
Change 1