TM 5-3805-293-23-4
0218
FRONT VALVE BANK CONTINUED
Blade Tip Circuit
1. Shut off machine (TM 5-3805-293-10).
N OT E
If performing task on machine with serial number prefix CBS, perform steps 3 and 4. If
performing task on machine with serial number prefix RMY, perform steps 5 and 6.
3. Remove two nuts (Figure 11, Item 6), washers (Figure 11, Item 5), bolts (Figure 11, Item 4), and washers
(Figure 11, Item 3) from line support brackets (Figure 11, Item 7).
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
C AU T I O N
Cap all open lines and fittings to prevent dirt from entering system and to prevent leakage.
Keep all parts clean from contaminants. Contaminants may cause rapid wear and
shortened component life.
4. Disconnect AWD line (Figure 11, Item 2) from AWD tube (Figure 11, Item 1).
Figure 11. AWD Line and Line Brackets (Serial Number Prefix CBS).
0218
Change 1