TM 5-3805-293-23-4
0209
CLEANING AND INSPECTION
000209
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
ASSEMBLY
000209
N OT E
Install drain valve as noted during removal.
1. Install new O-ring (Figure 6, Item 4) and drain valve (Figure 6, Item 3) on hydraulic oil filter base (Figure 6,
Item 1) and tighten nut (Figure 6, Item 2).
Figure 6. Hydraulic Filter Drain.
0209
2. Install new O-ring (Figure 7, Item 5) and plug (Figure 7, Item 4) on hydraulic oil filter base (Figure 7, Item 1).
3. Install new O-ring (Figure 7, Item 2) and plug (Figure 7, Item 3) on hydraulic oil filter base (Figure 7, Item 1).
Figure 7. Hydraulic Filter Base Plugs.
0209
END OF TASK