TM 5-3805-293-23-4
0179
REMOVAL CONTINUED
5. Remove four bolts (Figure 4, Item 2), washers (Figure 4, Item 1), and backup alarm (Figure 4, Item 3) from
lower radiator support (Figure 4, Item 4).
Figure 4. Backup Alarm.
0179
END OF TASK
CLEANING AND INSPECTION
000179
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000179
1. Install backup alarm (Figure 4, Item 3), four washers (Figure 4, Item 1), and bolts (Figure 4, Item 2) on lower
radiator support (Figure 4, Item 4).
2. Install backup alarm electrical connector (Figure 3, Item 2) in retainer (Figure 3, Item 1).
3. Connect main wiring harness connector (Figure 3, Item 3) to backup alarm electrical connector (Figure 3,
Item 2).
4. Position lower grille (Figure 2, Item 1) on rear of machine.
5. Seat two rubber grommets (Figure 2, Item 2) in slots in bottom of lower grille (Figure 2, Item 1).