TM 5-3805-293-23-4
0179
REMOVAL CONTINUED
N OT E
Two rubber grommets are seated in slots in bottom of lower grille.
2. Pull top of lower grille (Figure 2, Item 1) outward, separate two rubber grommets (Figure 2, Item 2) from slots in
lower grille, and remove lower grille from rear of machine.
Figure 2. Rubber Grommets On Grille.
0179
3. Disconnect main wiring harness connector (Figure 3, Item 3) from backup alarm electrical connector (Figure 3,
Item 2).
4. Remove backup alarm electrical connector (Figure 3, Item 2) from retainer (Figure 3, Item 1).
Figure 3. Backup Alarm Electrical Connector.
0179