TM 5-3805-293-23-4
0171
INSTALLATION CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure to
follow this warning may cause injury or death to personnel.
N OT E
Wheel lean arm assembly weighs approximately 500 lb (226 kg).
17. Install sling and lifting device on left wheel lean arm assembly (Figure 15, Item 5).
18. Using lifting device, install left wheel lean arm assembly (Figure 15, Item 5) on machine.
19. Install pin (Figure 15, Item 1), washer (Figure 15, Item 3), spacer (Figure 15, Item 4), and bolt (Figure 15,
Item 2) on wheel lean arm assembly (Figure 15, Item 5). Torque to 148 lb-ft (200 Nm).
20. Remove lifting device from left wheel arm (Figure 15, Item 5).
21. Repeat steps for right wheel lean arm assembly.
Figure 15. Wheel Lean Arm Assembly.
0171