TM 5-3805-293-23-4
0171
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Front axle weighs 2,000 lb (907 kg).
As required, use lifting device to relieve pressure on pin.
Note position of shims and thrustwashers to aid in installation.
Note quantity of shims toaid in installation.
12. Remove pin (Figure 7, Item 2), shims (Figure 7, Item 3) and thrust washers (Figure 7, Item 1) from front axle
(Figure 7, Item 4).
Figure 7. Front Axle Pin.
0171
13. Using lifting device, remove front axle from machine and lower onto a flat surface.
14. Remove lifting device and sling from front axle.
END OF TASK
CLEANING AND INSPECTION
000171
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK