TM 5-3805-293-23-3
0166
REMOVAL CONTINUED
000166
2. Remove electrical connector (Figure 2, Item 3) from all-wheel drive motor (Figure 2, Item 1) and disconnect
electrical connector (Figure 2, Item 3) from all-wheel drive wiring harness (Figure 2, Item 2).
3. Remove bolt (Figure 2, Item 5), front drive motor speed sensor (Figure 2, Item 4) and O-ring (Figure 2, Item 6)
from all-wheel drive motor (Figure 2, Item 1). Discard O-ring.
Figure 2. Speed Sensor.
0166
END OF TASK
CLEANING AND INSPECTION
000166
1. Clean and inspect all mechanical parts IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical parts IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK
Change 1