TM 5-3805-293-23-3
0155
REMOVAL CONTINUED
5. Remove tiedown strap (Figure 4, Item 7), from wiring harness (Figure 4, Item 6). Discard tiedown strap.
6. Remove bolt (Figure 4, Item 3), washer (Figure 4, Item 4), and clip (Figure 4, Item 5) from transmission
(Figure 4, Item 9).
7. Disconnect wiring harness connector (Figure 4, Item 8) from transmission clutch modulating valve (Figure 4,
Item 13).
8. Remove dust cap (Figure 4, Item 12), fitting (Figure 4, Item 11) and O-ring (Figure 4, Item 10) from
transmission clutch modulating valve (Figure 4, Item 13). Discard O-ring.
9. Remove two bolts (Figure 4, Item 1), washers (Figure 4, Item 2), transmission clutch modulating valve
(Figure 4, Item 13) and seal (Figure 4, Item 14) from transmission (Figure 4, Item 9). Discard seal.
Figure 4. Transmission Clutch Modulating Valve.
0155
END OF TASK
CLEANING AND INSPECTION
000155
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK