TM 5-3805-293-23-3
0142
REMOVAL CONTINUED
6. Remove bolt (Figure 4, Item 2), washer (Figure 4, Item 1), clamp (Figure 4, Item 3) and hydraulic hose
(Figure 4, Item 4) from bracket (Figure 4, Item 13).
7. Remove bolt (Figure 4, Item 5), washer (Figure 4, Item 6), and two clamps (Figure 4, Item 7) from hydraulic
hoses (Figure 4, Item 8).
8. Remove bolt (Figure 4, Item 9), washer (Figure 4, Item 10), clamp (Figure 4, Item 11) from hose (Figure 4,
Item 12).
Figure 4. Hydraulic Hose Clamps at Transmission.
0142
9. Disconnect implement and steering pump hose (Figure 5, Item 20) and remove O-ring (Figure 5, Item 19) from
fitting (Figure 5, Item 18). Discard O-ring.
10. Disconnect two AWD hoses (Figure 5, Item 1) and remove O-rings (Figure 5, Item 2) from fittings (Figure 5,
Item 3). Discard O-rings.
11. Disconnect implement and steering pump hose (Figure 5, Item 16) and remove O-ring (Figure 5, Item 15) from
fitting (Figure 5, Item 14). Discard O-ring.
12. Disconnect two AWD hoses (Figure 5, Item 8) and remove O-rings (Figure 5, Item 9) from fittings (Figure 5,
Item 10). Discard O-rings.
13. Remove three bolts (Figure 5, Item 12), washers (Figure 5, Item 11), and chassis grounds (Figure 5, Item 13)
from filter bracket (Figure 5, Item 17).
14. Remove two bolts (Figure 5, Item 5), washers (Figure 5, Item 6), clamps (Figure 5, Item 7) and wiring harness
(Figure 5, Item 4) from filter bracket (Figure 5, Item 17).