TM 5-3805-293-23-3
0109
REMOVAL
000109
N OT E
Tag and mark wires to aid in installation.
1. Slide lock tab (Figure 1, Item 3) back, and press down and disconnect electrical connector (Figure 1, Item 2)
from secondary engine speed sensor (Figure 1, Item 1).
2. Remove bolt (Figure 1, Item 5), secondary engine speed sensor (Figure 1, Item 1) and O-ring (Figure 1,
Item 4) from fuel injection pump (Figure 1, Item 6). Discard O-ring.
Figure 1. Speed Sensor.
0109
END OF TASK
CLEANING AND INSPECTION
000109
1. Clean and inspect all mechanical parts IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical parts IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK
