TM 5-3805-293-23-3
0107
REMOVAL
000107
N OT E
Tag and mark wires to aid in installation.
1. Slide lock tab (Figure 1, Item 5) back, and press down and disconnect electrical connector (Figure 1, Item 2)
from intake manifold pressure sensor (Figure 1, Item 4).
2. Remove intake manifold pressure sensor (Figure 1, Item 4) and O-ring (Figure 1, Item 3) from engine
(Figure 1, Item 1). Discard O-ring.
Figure 1. Pressure Sensor.
0107
END OF TASK
CLEANING AND INSPECTION
000107
1. Clean and inspect all mechanical parts IAW Mechanical General Maintenance Instructions (WP 0346).
2. Clean and inspect all electrical parts IAW Electrical General Maintenance Instructions (WP 0347).
END OF TASK