TM 5-3805-293-23-3
0106
REMOVAL
000106
1. Disconnect intake manifold air temperature sensor connector (Figure 1, Item 4) from wiring harness (Figure 1,
Item 3).
2. Remove intake manifold air temperature sensor (Figure 1, Item 2) and O-ring (Figure 1, Item 1) from tube
assembly (Figure 1, Item 5). Discard O-ring.
Figure 1. Intake Manifold Air Temperature Sensor Number 2.
0106
END OF TASK
CLEANING AND INSPECTION
000106
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
000106
1. Install new O-ring (Figure 1, Item 1) and intake manifold air temperature sensor (Figure 1, Item 2) on tube
assembly (Figure 1, Item 5).
2. Connect intake manifold air temperature sensor connector (Figure 1, Item 4) to wiring harness (Figure 1,
Item 3).
FOLLOW-ON TASKS
000106
Verify correct operation of machine (TM 5-3805-293-10).
END OF TASK
END OF WORK PACKAGE