TM 5-3805-293-23-3
0079
REMOVAL CONTINUED
N OT E
Bolt and clip are located on back of cylinder head.
6. Remove inlet pressure tube (Figure 3, Item 7) from cylinder head (Figure 3, Item 6).
7. Remove bolt (Figure 3, Item 1), clip (Figure 3, Item 2), and spacer (Figure 3, Item 3) from cylinder head
(Figure 3, Item 6).
8. Remove four clips (Figure 3, Item 4) from waste gate solenoid pigtail (Figure 3, Item 5) and inlet pressure tube
(Figure 3, Item 7).
Figure 3. Waste Gate Pressure Line.
0079
