TM 5-3805-293-23-3
0073
REMOVAL CONTINUED
2. Disconnect fuel injection pump supply line (Figure 2, Item 5) from filter base (Figure 2, Item 2).
3. Disconnect ECM return tube (Figure 2, Item 6) from filter base (Figure 2, Item 2).
4. Disconnect fuel line (Figure 2, Item 4) from filter base (Figure 2, Item 2).
5. Remove two bolts (Figure 2, Item 1) and filter base (Figure 2, Item 2) from bracket (Figure 2, Item 3).
Figure 2. Base Manifold.
0073
END OF TASK
CLEANING AND INSPECTION
00073
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
00073
N OT E
Install lines as tagged during removal.
1. Install filter base (Figure 2, Item 2) and two bolts (Figure 2, Item 1) on bracket (Figure 2, Item 3).
2. Connect fuel line (Figure 2, Item 4) to filter base (Figure 2, Item 2).
3. Connect ECM return tube (Figure 2, Item 6) to filter base (Figure 2, Item 2).
4. Connect fuel injection pump supply line (Figure 2, Item 5) on filter base (Figure 2, Item 2).