TM 5-3805-293-23-3
0072
INSTALLATION CONTINUED
WARN I N G
Replace any high-pressure fuel line that is loosened or removed. The fuel system
operates under extreme pressure. High-pressure fuel lines that have been loosened and
retorqued are prone to failure. Failure to follow this warning may result in injury or death to
personnel.
5. Position fuel rail (Figure 8, Item 1) on engine.
6. Loosely install six new high-pressure fuel injector lines (Figure 8, Item 4) on fuel injectors (Figure 8, Item 2).
7. Loosely install six high-pressure fuel injector lines (Figure 8, Item 4) on fuel rail (Figure 8, Item 1).
8. Install two clips (Figure 8, Item 3) on high-pressure fuel injector lines (Figure 8, Item 4).
9. Install new fitting (Figure 8, Item 9) on fuel rail (Figure 8, Item 1).
10. Loosely install return line (Figure 8, Item 8) on fuel rail (Figure 8, Item 1).
11. Loosely install high-pressure fuel supply line (Figure 8, Item 7) on fuel rail (Figure 8, Item 1).
12. Install fuel pressure sensor (WP 0111).
13. Connect fuel pressure sensor connector (Figure 8, Item 6) to fuel pressure sensor (Figure 8, Item 5).
14. Torque high pressure fuel lines to 22 lb-ft (30 Nm).
Figure 8. Fuel Rail.
0072
