TM 5-3805-293-23-3
0071
INSTALLATION
00071
1. Install two new dowel pins (Figure 5, Item 7) on inlet manifold cover (Figure 5, Item 4).
2. Install new inlet manifold cover gasket (Figure 5, Item 6) on engine.
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may result in injury to personnel.
3. Apply sealing compound to 15 bolts (Figure 5, Item 5). Install 15 bolts and inlet manifold (Figure 5, Item 4) on
engine. Torque in sequence shown (Figure 6) to 16 lb-ft (22 Nm).
4. Install inlet connection (Figure 5, Item 2), new O-ring (Figure 5, Item 3), and four bolts (Figure 5, Item 1) on
inlet manifold cover (Figure 5, Item 4). Torque bolts to 16 lb-ft (22 Nm).
Figure 5. Inlet Manifold.
0071