TM 5-3805-293-23-3
0071
REMOVAL CONTINUED
9. Remove four bolts (Figure 4, Item 1), O-ring (Figure 4, Item 3), and inlet connection (Figure 4, Item 2) from
inlet manifold cover (Figure 4, Item 4). Discard O-ring.
10. Remove 15 bolts (Figure 4, Item 5) and inlet manifold cover (Figure 4, Item 4) from engine.
11. Remove two dowel pins (Figure 4, Item 7) and inlet manifold cover gasket (Figure 4, Item 6) from inlet manifold
(Figure 4, Item 4). Discard gasket and dowel pins.
Figure 4. Inlet Manifold.
0071
END OF TASK
CLEANING AND INSPECTION
00071
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK