TM 5-3805-293-23-3
0054
INSTALLATION CONTINUED
WARN I N G
Use caution when using adhesives and sealants. Prolonged inhalation of vapors can
cause lung irritation. Contact with skin can cause dermatitis. Wear gloves and safety
goggles and use product in a well-ventilated area away from open flame. If ingested, keep
individual calm and seek medical attention. DO NOT induce vomiting. If contact with skin
or eyes is made, flush thoroughly with water. Dispose of cleanup rags IAW local policy and
ordinances. Failure to follow this warning may cause injury to personnel.
18. Apply sealing compound to elbow (Figure 19, Item 4).
19. Install elbow (Figure 19, Item 4) on coolant tube (Figure 19, Item 5).
20. Install retaining band (Figure 19, Item 3) on tube (Figure 19, Item 5). Install washer (Figure 19, Item 1) and bolt
(Figure 19, Item 2) on retaining band.
Figure 19. Coolant Tube Retaining Band.
0054
END OF TASK
FOLLOW-ON TASKS
00054
1. Fill engine coolant (WP 0052).
2. Install engine enclosure (WP 0225).
3. Remove articulation lock pin (TM 5-3805-293-10).
END OF TASK
END OF WORK PACKAGE
