TM 5-3805-293-23-3
0043
SPEED SENSOR TEST CONTINUED
00043
8. Scroll with down arrow button (Figure 57, Item 3) until "All Wheel Drive" appears in display (Figure 57, Item 1).
Press OK button (Figure 57, Item 2). "Right/Left Motor Spd" appears in display (Figure 58, Item 1).
Figure 57. All-Wheel Drive Display.
0043
9. Set engine speed to full throttle (TM 5-3805-293-10).
10. Activate CREEP mode (TM 5-3805-293-10).
a. Leave the transmission control switch in NEUTRAL position.
b. With command for wheel speed at zero, verify front wheels are not spinning.
c.
Verify both speed sensors read zero on display (Figure 58, Item 1). Record speeds.
Figure 58. Zero RPM Display.
0043
