TM 5-3805-293-23-3
0043
POWERTRAIN CLUTCH SYSTEM PRESSURE TEST CONTINUED
N OT E
Perform Fill Time for the Transmission Clutch Calibrated (in this work package) if any
modulation valves were changed or replaced.
Calibration will not affect to pressure at the clutch.
p
29. Install driveshaft on machine (WP 0135).
30. Install cover (Figure 27, Item 1), clamp (Figure 27, Item 2), two washers (Figure 27, Item 4), and bolts (Figure
27, Item 3) on machine.
Figure 27. Cover Clamp.
0043