TM 5-3805-293-23-2
0034
CAN DATA LINK CIRCUIT TEST CONTINUED
19. Using digital multimeter, test CAN+ circuit K900-YL between diagnostic connector (Figure 14, Item 3) terminal
G (Figure 14, Item 4) and harness connector P-C69 (Figure 14, Item 1) terminal 9 (Figure 14, Item 2).
Resistance should be less than 5 ohms.
a. Continuity - proceed step 20.
b. No Continuity - harness is open, replace lower cab harness (WP 0266).
Figure 14. Diagnostic Connector and P-C69 Harness Connector.
0034
