TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2954-14 Unknown Electronic 8. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
Implement Control Special
Proceed to step 9.
Instruction - Continued
ing harness connector P-C45
(WP 0009, Figure 72) terminal 56
Replace cab lower wiring harness
and machine ground.
(WP 0266).
Resistance should be less than
Connect cab lower wiring harness
5.0 Ohms.
connector P-C45 (WP 0009, Figure
72) to Implement 2 ECM J1 (WP
0009, Figure 73).
Proceed to step 11.
Resistance 5.0 Ohms or Less -
Proceed to step 10.
ing harness connector P-C45
(WP 0009, Figure 72) terminal 57
Replace cab lower wiring harness
and machine ground.
(WP 0266).
Resistance should be less than
Connect cab lower wiring harness
5.0 Ohms.
connector P-C45 (WP 0009, Figure
72) to Implement 2 ECM J1 (WP
0009, Figure 73).
Proceed to step 11.
10. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
Replace implement 2 ECM (WP
ing harness connector P-C45
0268).
(WP 0009, Figure 72) terminal 70
and machine ground.
Replace cab lower wiring harness
Resistance should be less than
(WP 0266).
5.0 Ohms.
Connect cab lower wiring harness
connector P-C45 (WP 0009, Figure
72) to Implement 2 ECM J1 (WP
0009, Figure 73).
Proceed to step 11.
11. Using the MSD (WP 0006), select 2954-14 Code Active - Repeat
Implement 120M and verify 2954- troubleshooting code from the
14 is not active.
beginning.
2954-14 Code Not Active -
Troubleshooting complete.
END OF WORK PACKAGE
0031-165/(166 blank)