TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2201-04 Right Steering Cyl-
4. Connect the steering position
inder Position Sensor Volt-
sensor harness UC-C2 (WP
age Below Normal -
0009, Figure 196) to right steering
Continued
position sensor (WP 0009, Figure
197) (WP 0169).
5. Disconnect the rear chassis wir-
ing harness connector FA-C21
(WP 0009, Figure 124) from
transmission ECM J2 (WP 0009,
Figure 112).
6. Disconnect the cab lower wiring
harness connector P-C39 (WP
0009, Figure 70) from implement
ECM J-2 (WP 0009, Figure 71)
(WP 0268).
7. Disconnect the cab lower wiring
harness connector P-C41 (WP
0009, Figure 68) from implement
ECM J-1 (WP 0009, Figure 69)
(WP 0268).
8. Using a digital multimeter, mea-
Continuity - Proceed to Test Step 4.
sure resistance between rear
No Continuity - Proceed to Test Step
chassis wiring harness connector
7.
FA-C21 (WP 0009, Figure 124)
terminal 16 and machine ground.
There should be no continuity.
Test Step 4. Test for Shorted Cab
Lower Wiring Harness.
1. Disconnect the rear chassis wir-
ing harness connector FA-C22
(WP 0009, Figure 47) from cab
lower wiring harness P-C69 (WP
0009, Figure 46).
0031-64