TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2201-03 Right Steering Cyl-
3. Using the MSD (WP 0006), select 2201-03 Code Active - Repeat
inder Position Sensor Volt-
Implement 120M and verify 2201- troubleshooting code from the
age Above Normal -
03 is not active.
beginning.
Continued
2201-03 Code Not Active -
Troubleshooting complete.
Test Step 12. Test for Shorted Cab
Lower Wiring Harness to Imple-
ment ECM.
1. Using a digital multimeter, mea-
Continuity - Cab lower wiring
sure resistance between cab
harness is shorted, replace cab lower
lower wiring harness connector P-
wiring harness (WP 0266).
C39 (WP 0009, Figure 70) termi-
Connect the steering position sensor
nal 16 and all other P-C39 termi-
harness UC-C2 (WP 0009, Figure
nals.
196) to right steering position sensor
There should be no continuity.
(WP 0009, Figure 197) (WP 0169).
Connect the rear chassis wiring
harness connector FA-C21 (WP 0009,
Figure 124) to transmission ECM J2
(WP 0009, Figure 112).
Proceed to step 2.
No Continuity - Replace
transmission ECM (WP 0137).
Connect the steering position sensor
harness UC-C2 (WP 0009, Figure
196) to right steering position sensor
(WP 0009, Figure 197) (WP 0169).
Connect the cab lower wiring harness
connector P-C39 (WP 0009, Figure
70) to implement ECM J-2 (WP 0009,
Figure 71) (WP 0268).
Connect the cab lower wiring harness
connector P-C41 (WP 0009, Figure
68) to implement ECM J-1 (WP 0009,
Figure 69) (WP 0268).
Proceed to step 2.
2. Using the MSD (WP 0006), select 2201-03 Code Active - Repeat
Implement 120M and verify 2201- troubleshooting code from the
03 is not active.
beginning.
2201-03 Code Not Active -
Troubleshooting complete.
0031-61
