TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2200-03 Left Steering Cylin-
2. Using a digital multimeter, mea-
Continuity - Proceed to Test Step 11.
der Position Sensor Voltage
sure resistance between front
No Continuity - Cab lower wiring
Above Normal - Continued
chassis wiring harness connector
harness is shorted, replace cab lower
U-C36 (WP 0009, Figure 188) ter-
wiring harness (WP 0266).
minal 6 and all other U-C36 termi-
Connect the steering position sensor
nals.
harness UA-C2 (WP 0009, Figure
There should be no continuity.
192) to left steering position sensor
(WP 0009, Figure 193) (WP 0169).
Connect the rear chassis wiring
harness connector FA-C21 (WP 0009,
Figure 124) to transmission ECM J2
(WP 0009, Figure 112).
Connect the rear chassis wiring
harness connector FA-C20 (WP 0009,
Figure 113) to transmission ECM J1
(WP 0009, Figure 112).
Proceed to step 3.
3. Using the MSD (WP 0006), select 2200-03 Code Active - Repeat
Implement 120M and verify 2200- troubleshooting code from the
03 is not active.
beginning.
2200-03 Code Not Active -
Troubleshooting complete.
Test Step 11. Test for Shorted Front
Chassis Wiring Harness.
1. Disconnect the left steering cylin-
der position sensor wiring har-
ness connector UA-C1 (WP 0009,
Figure 194) from front attachment
wiring harness U-C51 (WP 0009,
Figure 195) (WP 0136).
0031-19
