TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2200-03 Left Steering Cylin-
2. Using a digital multimeter, mea-
Continuity - Left steering cylinder
der Position Sensor Voltage
sure resistance between left
position sensor harness is open,
Above Normal - Continued
steering cylinder position sensor
replace left steering position sensor
wiring harness connector UA-C1
harness (WP 0136).
(WP 0009, Figure 194) terminal B
Connect the front chassis wiring
and all other UA-C1 terminals.
harness connector U-C36 (WP 0009,
There should be no continuity.
Figure 188) to cab lower wiring
harness P-C151 (WP 0009, Figure
189) (WP 0180).
Connect the cab lower wiring harness
connector P-C39 (WP 0009, Figure
70) to implement ECM J-2 (WP 0009,
Figure 71) (WP 0268).
Connect the cab lower wiring harness
connector P-C41 (WP 0009, Figure
68) to implement ECM J-1 (WP 0009,
Figure 69) (WP 0268).
Connect the rear chassis wiring
harness connector FA-C21 (WP 0009,
Figure 124) to transmission ECM J2
(WP 0009, Figure 112).
Connect the rear chassis wiring
harness connector FA-C20 (WP 0009,
Figure 113) to transmission ECM J1
(WP 0009, Figure 112).
Proceed to step 3.
0031-20
