TM 5-3805-293-23-2
0030
Table 1. Implement Code (2169-03 to 2182-13) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2169-06 Circle Sideshift Left
Test Step 2. Test for Faulty Circle
Sideshift Left Solenoid.
Normal - Continued
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Disconnect front attachment wir-
ing harness connector U-C43
(WP 0009, Figure 220) from circle
sideshift left solenoid (WP 0009,
Figure 221) (WP 0180).
3. Using MSD (WP 0006), select
2169-05 Code Active - Replace circle
implement control #2 and check if
sideshift left solenoid (WP 0245).
code 2169-05 becomes active.
Proceed to step 4.
2169-06 Code Remains Active -
Proceed to Test Step 3.
4. Using MSD (WP 0006), select
2169-06 Code Active - Repeat
implement control #2 ECM and
troubleshooting code from the
verify 2169-06 is not active.
beginning.
2169-06 Code Not Active -
Troubleshooting complete.
Test Step 3. Test for Shorted Cab
Lower Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Disconnect cab lower wiring har-
ness connector P-C45 (WP 0009,
Figure 72) from implement 2 ECM
J1 (WP 0009, Figure 73) (WP
0268).
sure for continuity between cab
lower wiring harness connector P-
ECM (WP 0268).
C45 (WP 0009, Figure 72) termi-
Connect front attachment wiring
nal 48 and terminal 50. There
harness connector U-C43 (WP 0009,
should be no continuity.
Figure 220) to circle sideshift left
0180).
Proceed to step 4.
0030-7