TM 5-3805-293-23-2
0029
Table 1. Implement Code (2160-03 TO 2168-13) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2160-05 Blade Left Raise
7. Using digital multimeter, test for
Resistance 5.0 Ohms or Less -
Solenoid Current Below Nor-
continuity between harness con-
Replace implement 1 ECM (WP
mal - Continued
nector P-C41 (WP 0009, Figure
0268).
68) terminal 58 and terminal 60.
Connect front attachment harness
Resistance should be less than
connector U-C25 (WP 0009, Figure
5.0 ohms.
242) to blade left raise solenoid (WP
0009, Figure 243), and install rear
front frame cover (WP 0224).
Proceed to step 8.
Resistance More Than 5.0 Ohms -
Replace cab lower wiring harness
(WP 0266).
Connect front attachment harness
connector U-C25 (WP 0009, Figure
242) to blade left raise solenoid (WP
0009, Figure 243), and install rear
front frame cover (WP 0224).
Proceed to step 8.
8. Using MSD (WP 0006), select
2160-05 Code Active - Repeat
Implement 120M and verify 2160- troubleshooting code from the
05 is active.
beginning.
2160-05 Code Not Active -
Troubleshooting complete.
0029-6
