TM 5-3805-293-23-2
0027
Table 1. Implement Code (0615-02 TO 2113-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
1471-02 Steering Control
2.
Using digital multimeter, test for
Continuity - Cab lower wiring
Position Sensor #1 Data
continuity between cab lower wir-
harness is shorted, replace cab lower
Erratic, Intermittent or Incor-
ing harness connector P-C69
wiring harness (WP 0266).
rect - Continued
(WP 0009, Figure 46) terminal 49,
Connect the rear chassis wiring
and all other terminals, and
harness connector FA-C21 (WP 0009,
machine ground.
Figure 124) to transmission ECM J2
There should be no continuity.
(WP 0009, Figure 112).
Proceed to step 3.
No Continuity - Rear chassis wiring
harness is shorted, replace rear
chassis wiring harness (WP 0188).
Connect the cab lower wiring harness
connector P-C39 (WP 0009, Figure
70) to implement ECM J-2 (WP 0009,
Figure 71) (WP 0268).
Connect the cab lower wiring harness
connector P-C51 (WP 0009, Figure
118) to LH joystick connector J-1 (WP
0009, Figure 119) (WP 0282).
Connect the cab lower wiring harness
connector P-C41 (WP 0009, Figure
68) to implement ECM J-1 (WP 0009,
Figure 69) (WP 0268).
Proceed to step 3.
3. Using the MSD (WP 0006), select 1471-02 Code Active - Repeat
Implement 120M and verify 1471- troubleshooting code from the
02 is not active.
beginning.
1471-02 Code Not Active -
Troubleshooting complete.
Test Step 6. Test for Shorted Cab
Lower Wiring Harness to Imple-
ment ECM.
1. Using digital multimeter, test for
Continuity - Cab lower wiring
continuity between cab lower wir-
harness is shorted, replace cab lower
ing harness connector P-C39
wiring harness (WP 0266).
(WP 0009, Figure 70) terminal 18,
Connect the rear chassis wiring
and all other terminals, and
harness connector FA-C21 (WP 0009,
machine ground.
Figure 124) to transmission ECM J2
There should be no continuity.
(WP 0009, Figure 112).
Proceed to step 2.
0027-53