TM 5-3805-293-23-2
0024
Table 1. Window Wipers and Washers Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. RH Door Wiper Does Not
Test Step 18. Test 200-BK Ground
Operate Properly - Con-
Circuit to Wiper Harness for High
tinued
Resistance or Open.
1. Disconnect cab upper wiring har-
ness connector R-C13 (WP 0009,
Figure 364) from wiper harness
connector WJ-C1 (WP 0009, Fig-
ure 365) (WP 0265).
Replace cab upper wiring harness
resistance between R-C13 termi-
(WP 0265).
nal A (WP 0009, Figure 364) and
machine ground.
Proceed to step 3.
Resistance Less Than 5.0 Ohms -
Proceed to Test Step 19.
3. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
4. Turn right door wiper/washer con- Right Door Wiper Does Not Work in
One Or More Positions Or Does Not
trol to LOW, HIGH, and PARK
Return To Park - Repeat trouble-
position (TM 5-3805-293-10).
shooting from beginning.
Right Door Wiper Works In Low,
and High Position, and Returns to
Park - Troubleshooting complete.
Test Step 19. Test 528-PK High
Speed Circuit and 527-GN Low
Speed Circuit for High Resistance
or Open in Cab Upper Wiring Har-
ness.
resistance between R-C13 termi-
Replace cab upper wiring harness
nal D (WP 0009, Figure 364) and
(WP 0265).
R-C32 terminal 4 (WP 0009, Fig-
Proceed to step 3.
ure 363).
Resistance Less Than 5.0 Ohms -
Proceed to step 2.
resistance between R-C13 termi-
Replace cab upper wiring harness
nal C (WP 0009, Figure 364) and
(WP 0265).
R-C32 terminal 5 (WP 0009, Fig-
Proceed to step 3.
ure 363).
Resistance Less Than 5.0 Ohms -
Proceed to Test Step 20.
3. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-3805-293-10).
0024-68